[Drake] LS-7 capacitors

[Dennis Monticelli]

The ripple current rating on the suggested cap seems marginal and it's
rated at 85C.  For an L7 or other amp's PS I would go through the Mouser
catalog and choose the one that has the highest ripple rating and in the
most costly 105C temp rating.  I wouldn't be concerned with dimensions as
practically any new lytic could be made to fit.

You might also take a good look at those bleeders when you're in there.

Dennis AE6C

On Sun, Mar 13, 2016 at 4:30 PM, Joe Connor via Drake <drake at mailman.qth.net
> wrote:

> Would these work (220mfd)?
>
> http://www.mouser.com/ProductDetail/Nichicon/UVK2W221MRD/?qs=sGAEpiMZZMvwFf0viD3Y3Z6tIN1aZNsomfHB6zMs0FA%3d
>
> Joe Connor
>
>
>     On Sunday, March 13, 2016 7:22 PM, "dancots at comcast.net" <
> dancots at comcast.net> wrote:
>
>
>
>  I needs 8 200uf @ 450vdc capacitors to rebuild a LS-7 power supply. Does
> anyone know a source?
>
>
>
>
> Dan K9DTC
>
>
> ______________________________________________________________
> Drake mailing list
> Home: http://mailman.qth.net/mailman/listinfo/drake
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Drake at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
>
> ______________________________________________________________
> Drake mailing list
> Home: http://mailman.qth.net/mailman/listinfo/drake
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Drake at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>