[Drake] help identifiying a Drake cabinet

[Brian Harris]

I recently acquired a Drake TR-4 along with an AC-4 that was installed in a 
Drake-looking cabinet.  The cabinet's height and width are identical to that of 
the TR-4 cabinet but it's about 3 inches less deep than the TR-4 cabinet.  There 
is a speaker mounted in the front of the cabinet on a piece of wood with a 
partial metal grill (looks homemade). There is a wooden divider between the 
speaker section and the power supply sections.  There are five punched holes 
along the top and five punched holes along the bottom of each side of the 
cabinet.  These holes are in the back half of the cabinet where the power supply 
is.  Similarly, there are five rows of eleven holes in the top of the rear half 
of the cabinet.  On the cabinet sides there are two countersunk holes that look 
like they would be used for mobile mounting.  There is a single row of eleven 
holes in the bottom on the cabinet about midway between the front and back.  
Last, there is a 60 minute mechanical timer in the top of the cabinet near the 
front.  It may say Pronto under the screw that holds the time knob in place.  
Any ideas?

Thanks in advance,

 Brian Harris, WA5UEK
phone 214-763-5977
email cosmophone at yahoo.com
website www.myhamshack.com/wa5uek


When they call the roll in the Senate, the Senators do not know whether to 
answer "present" or "not guilty."  Theodore Roosevelt