[Drake] TR4C repairs

[wabate]

Dick,

XMIT gain 9:30
Plate     7.5
Load      2.5
RF tune   5.7
Output    150 watts,
Current   440 ma

Could tune up to about 175 watts but then current would be over 500 ma. 
  Hope that helps.  I'm trying to preserve my sanity too.  Lost the slug 
on L7.  Know its on the floor somewhere!!!  HI HI..

GL,

Bill, K3PGB


Dick KF4NS wrote:

 > For the moment I will not say much, just a request before anything 
further. I am trying to keep my cool.
 >
 > Would someone please try something for me on a good working TR4C?
 >
 > Connect a dummy load, no mic no key plugged in.
 > Set the VFO for 14.260mhz and tune up for max power out as read on a 
decent wattmeter (not relative power on the S meter).
 > Use the X-CW mode and  SIDEBAND X.
 >
 > Then let me know the XMIT GAIN clock position, the PLATE, RF TUNE and 
LOAD numerical knob setting, output watts and plate current.
 >
 > I am trying to maintain my sanity but not sure how long I can last. 
Enough for now.
 >
 > Thanks and 73, Dick KF4NS
 > St Petersburg, FL 33714 USA
 > Keep The Glow!
 >
 > ______________________________________________________________
 > Drake mailing list
 > Home: http://mailman.qth.net/mailman/listinfo/drake
 > Help: http://mailman.qth.net/mmfaq.htm
 > Post: mailto:Drake at mailman.qth.net
 >
 > This list hosted by: http://www.qsl.net
 > Please help support this email list: http://www.qsl.net/donate.html
 >
 >