[Drake] TR4C filter cap

[Dick KF4NS]

I plan on replacing the multi cap can with individual caps as part of 
the restoration, but first I have a couple questions.

1. Why is it there to begin with since the AC-4 has already filtered 
the 250V and why are there 3 different cap values? ( I already 
replaced the 10mfd at 25V right at the pin8 connection of V19A with a 
10 @ 50V)

2. The three values I have in mine are 60-20-10mfd at 250V so I 
planned on using a 100-33-22 @ 350V but would appreciate your input on 
these values I chose.

73, Dick KF4NS
St Petersburg, FL 33714 USA
Keep The Glow!