[Drake] FS-4

[James Amos (jimamos)]

It should be coax.   RG-174 would worked fine for me.   What are the
characteristics of RG-62?  Something a little fatter then RG-174 might
better with the RCA connectors.

73 Jim N8CAH 

-----Original Message-----
From: drake-bounces at mailman.qth.net
[mailto:drake-bounces at mailman.qth.net] On Behalf Of Raymond Perkins
Sent: Wednesday, February 18, 2009 8:05 AM
To: drake at mailman.qth.net
Subject: [Drake] FS-4

Does the cable connecting the FS-4 frequency synthesizer to R-4C need
anything special to connect to the receiver? Can I use a direct shielded
cable? Does it have to coax? Perhaps RG62/U?  

Only description I have found on internet thus far is a home-brew
synthesizer that had a cable with a shunt resistor and in-line capacitor
at the end to connect to R-4C. Is this necessary on a cable I intend to
use? Thanks for your help.

73 Raymond  w5vpu
______________________________________________________________
Drake mailing list
Home: http://mailman.qth.net/mailman/listinfo/drake
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Drake at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html