[Drake] R4B/T4XB Cables

[telegrapher at att.net]

DirecTV and probably others have available with their receiver packages 
a 3 conductor cable that has a pair of RCA jack types for the audio from 
the receiver to the TV set or wherever you want to run it along with an 
RF cable for taking the video output from the receiver to the TV or 
again wherever.  A lot of them never get put to use and i suppose if you 
asked one of the techs, they might give you a couple sets.  They are 
about 5 feet long i think.  Should be pretty good quality material i 
would think.  What they don't use on installations for whatever reason, 
they throw into a bag or on a shelf in the truck where they either lay 
around till the get smashed or destroyed in some manner or thrown out 
from being in a 'dirty' package.  These might work well for not only 
Drake but Collins gear.

Larry
W0OGH


fkamp at comcast.net wrote:

> Garey Barrell wrote:
> 
>> All but the INJ cable can be bought at Radio Shack or any
>> store that sells audio equipment, probably for a LOT less
>> than they sell for online, PLUS shipping.
>>
> 
> That is probably true.
> 
> With all the traffic on cables I would guess there is enough info 
> already available for anyone to either make or buy a set of cables.
> 
> Those who are picky about getting quality cables might be interested in 
> my offer.  No, I dont buy stuff from Radio Shack.
> 
> My Drake C-line uses six cables.  Each cable is 24 inches long (personal 
> preference, I like my rigs sitting side by side and I dont want to trip 
> on cables), made from RG62AU, connectors are RCA phono-gold plated with 
> spring relief at cable termination. Both ends of each cable are labled.
> 
> I am offering a set of six cables, built like the ones I use, for $60 
> plus shipping.  If you dont care to pay shipping I can give you 
> directions to my shack and you can pick them up. That is 10 bucks a 
> cable.  I am sure someone out there can make them for less, but that is 
> my price.
> 
> If you are on a budget, I can offer you 50 feet of RG62AU for $5 plus 
> shipping.  You provide the connectors, tools, lables and labor.
> 
> No, they dont all have to be made from RG62AU, but if they are you dont 
> have to worry about which one is.
> 
> WWW.K5DKZ.COM
> 
> Regards,
> Frank Kamp
> K5DKZ
> ______________________________________________________________
> Drake mailing list
> Home: http://mailman.qth.net/mailman/listinfo/drake
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Drake at mailman.qth.net
>