[Drake] R-4C Alignment Question

[dmartin]

In a related question, what purpose is served during the alignment process in 
temporarily connecting resistors to these contacts? I do not have the manual 
in front of me, but I recall one resistor goes from contact to ground and 
another jumpers the other contact off to somewhere else?

Dan

On Wed, 19 May 2004 10:06:33 -0400, Garey Barrell wrote
> The rotor contacts are the "longer" ones that are always in 
> contact with the "blade" of the switch.
> 
> They are the ones with the small, air wound coils connected to 
> them, and a lead to either T3 or T4.
> 
> 73, Garey - K4OAH
> Atlanta
> 
> Bill Jackson wrote:
> > Greetings,
> > 
> > Can someone tell me which are the "green" colored rotor contacts on 
sections
> > S1D and S1E of the band switch on an R-4C?  The coloring is gone on mine,
> > probably due to switch cleaning with alcohol.  I would like to touch up 
the
> > alignment per section 5-12 of the manual.
> > 
> > Thanks!
> > 
> > Bill, K9RZ
> >
> 
> _______________________________________________
> Drake mailing list
> Drake at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/drake


--

--