[Drake] 4-NB Problem

[Allen (Marty) Martin]

I am having a problem with the alignment procedure where the manual says
while grounding pin 2 of the calibrator and the noise blanker on,  use the
rf gain control to keep the voltage on R45 at 10 volts.
The RF gain control has very little effect and also adjusting C19 and C25 as
per the manual also has very little effect.
Has anybody else experienced this?

Thanks
Marty


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.614 / Virus Database: 393 - Release Date: 3/5/04