[Drake] TR-4 Hum

Fri, 9 Jan 2004 01:20:19 -0800

Try cleaning the pins on the RV-4 plug.

Regards

Dave Harmon
NSRCA 586
K6XYZ[at]comcast[dot]net
Torrance, Ca.

-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of Byron Tatum
Sent: Friday, January 09, 2004 12:26 AM
To: [email protected]
Subject: [Drake] TR-4 Hum

Hello-
    If anyone can help here I would be most appreciative :
        I have a later model TR-4 { plain TR-4} and RV-4 combo.After I
had been using it for several months I noticed a fairly loud hum on all
bands except 80 and 20.  I ruled out the AC-4 supply and filter cap in
the TR-4 itself, I know these are good. I suspect something in the
pre-mixer, however the hum is only present when the RV-4 is plugged in.
Without RV-4 plugged in there is no hum on any band. The TR-4 and RV-4
are well bonded with ground braid. I replaced V-1 pre-mixer tube with a
known good 6EA8. The hum dis-appears when I pull this tube out of its
socket. I did notice that the hum became stronger and more erratic as I
moved my fingers around the tube.
    I tried a second, similiar TR-4 and when connected to RV-4 it did
not hum. So I do not suspect the RV-4 itself. So I feel the problem is
in the radio itself, and only occurs : 
                                                1.When the RV-4 is
plugged in.
                                                2. Only on 40, 15, and
10 meters {bands that employ pre-mixer}
        HELP someone please!
                                            Thanks, WA5THJ.

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
_______________________________________________
Drake mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/drake