[Drake] Drake B Line Question

[W4UOC@aol.com]

I have a Drake B line and have noticed quite a bit of drive difference when I 
use either VFO vs Separate.  As an example if I tune the transmitter with 
using the receiver VFO I would get 60 watts with the same audio gain, 70 
watts with the xmtr VFO and 100 watts output in tune set with "separate".

I suspect that in either the B or C vfo the cable (inj) is loading down the 
drive circuit.  In the separate position I suspect the "inj" cable is out of 
the circuit.

I have a low impedence "inj" cable.

Any suggestions as to what is causing the loss of drive or a fix to solve 
this unusual situation?

Tom Koch - W4UOC
Atlanta, GA
 <A HREF="http://members.aol.com/w4uoc/index.html">W4UOC's Home Page</A> 


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---