[Drake] Drake B Line
James C. Owen, III
[email protected]
Wed, 12 Feb 2003 11:13:47 -0800 (PST)
> From: "n3drk" <[email protected]>
>
> I have the b line and am being told i am 200 cycles too high in
> lsb in the
> transceive position. After adjusting T61 for the proper "canary
> sound", i
> still am 200 high according to on air reports. What need i do
> to correct
> this?
>
> john
>
>
John check the BFO Frequency. Also check that the BFO cable
between the units is connected. Use the instructions in the
manuals and set the BFO in both units correctly. If the cable is
not connected then the BFO in each unit is used for that unit, if
they are different then you won't be where you think you are.
When the cable is connected they should lock together.
73 Jim K4CGY
__________________________________________________
Do you Yahoo!?
Yahoo! Shopping - Send Flowers for Valentine's Day
http://shopping.yahoo.com