[Drake] bandswitch

Mon, 8 Apr 2002 18:53:48 -0700

The group should assume that you are looking for a bandswitch that you have
described ???

If so, you most likly can repair the one  you have. Just drill out the
rivets holding in the burned contacts and replace them.

73
Jim W7RY

----- Original Message -----
From: "NI4L" <[email protected]>
To: <[email protected]>
Sent: Monday, April 08, 2002 3:37 PM
Subject: [Drake] bandswitch

> Hi everyone i have a clipperton L it has a 3 wafer 6t switch in it it
> also has one added wafer for the tuned input board. it has 3 ceramic 1
> bakelite
> the diminsions i need are as follows
> 1 5/8" or 1 7/8" bolt holes
> 2 1/4" back from front no more than this
> 1/4 or 3/8 shaft.
> ceramic wafers needs at least 3 and extra spot for one more for tuned
> input board.
> Needs to be in good shape can anyone help me out?
> thanks chris NI4L
>
> --
>
> NI4L CUSTOM RESONANT DIPOLE
> LEGAL LIMIT ++ CUSTOM MADE CENTER FED DIPOLE
> Made with the same components used by our military forces today
> Custom made to YOUR FREQUENCY of operation
> Let me take the hassle out of making a RESONANT DIPOLE for you.
> Click here for more info...  http://www.angelfire.com/nb/ni4l/
>
>
> _______________________________________________
> Drake mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/drake
>