[DCboatanchors] HF Antennas and related items FS

[Ken Simpson, W8EK]

HF Antenna related items For Sale -- Vertical antenna,
Antenna switch, SWR Bridges, Low Pass TVI Filter,
Connectors and more


Hustler 4BTV "Base station" HF vertical antenna

The 4BTV covers 10, 15, 20, and 40 meters.
It can also cover 75/80 meters by using an RM-80 S resonator.

This one is in extremely good shape. It actually still shines!
No corrosion evident. Penetrox was used on the original
assembly, so it comes apart easily.

Paper work is included. but connection points are well marked
for easy reconstruction. $120

I would prefer pickup near Ocala, Florida, just off of I-75.
It will easily fit inside a minivan, or it can be broken down
more to go inside a car. It is possible to ship it, but the
cost is high due to it being oversize. Obviously, shipping
is not included in the price.


B & W CS-6 G (also known as 595) Coax Switch

This is the switch that is in a rectangular box about 9
inches long, with seven SO-239 connectors coming out
of the back. It will switch 6 antennas. Unused positions
are grounded.

This one is in nice shape. I do not find any scratches
or defects on it.

With paper work for $45.


SWR Bridge / Field Strength Meter:

Royce 2-100 Single Meter SWR Bridge / Field Strength Meter

With SO-239 connectors, it covers from 3 to 150 MHz,
covering HF, 6 meters, and 2 meters, so is ideal for the new
rigs with 6 meters and 2 meters in them.

This one works fine, and looks extremely nice. I do not see
any scratches on it, but it does have a previous owners name
on it. In its original box with original instructions. $32


Dual Meter SWR Bridge:

Quement SWB-2

This unit features two separate meters -- one for reading
forward power and another for reading SWR. This permits one
to easily monitor both the power going out, and the SWR on
the antenna at the same time. They were made in Japan, and
labeled with various names, including Swan, Siltronix, and
Quement. SO-239 connectors on each end.

It will work on HF, and VHF, covering 3 to 150 MHz, so is
ideal for the new rigs that include 6 and 2 meters.

It works fine and looks great. With paper work for $40.


Low Pass TVI Filter:

A low pass TVI filter is added to the transmitter to reduce
harmonic interference. It has SO-239 connectors and includes
paper work.

B & W FL-10/1500
This filter cuts off just above 10 meters, and handles 1500
Watts. It is the latest model B&W filter.
It looks very close to new. $40.


Coax connectors and adapters:

Prices are per connector. Several of each are available.
These are NOS (have not been used).

"N" Connector - Double Male - $8

BNC male for coax cable
standard type - $2
crimp on type - $3

Chassis mount BNC female
square mount (uses 4 screws) - $3
screw in type - $3

BNC "T" - two female and one male - $3

Antenna adapter to fit the BNC connector on the HT
and provide an SO-239 connector that will permit
a PL-259 to be attached. (BNC male to UHF female) $5

UHF Male (PL-259) to BNC female (opposite of above) $5

UHF double female "Barrel connector" (two SO-239 together) $3

UHF "T" connector with two female (SO-239) and one male
(PL-259) connection - $5


Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone  (352) 732-8400