[DCboatanchors] Vintage Desk Microphone, plus other mics FS

[Ken Simpson, W8EK]

For Sale:

Vintage High Impedance Desk Microphone

This desk microphone is quite old.  It has a cotton covered
cord, so that dates it to a certain extent.  It sort of looks
like a smaller D-104, but brown in color.  It is about 8
inches high (stand, mic, and all) with the head about 2 inches
in diameter.  It does not have a PTT switch.  It looks like
it would have been used when the single button mic connectors
were used (such as the DX-40, DX-60, etc.), although it
presently has an RCA phone plug with a long center pin on it.

This one shows some wear, but it is very minor, considering
its age. $50


Another High Impedance Desk Microphone:

Yaesu YD-844 Desk Microphone

This is a 50 K impedance desk microphone that really
looks sharp.  It has a standard PTT switch on it, and
also a locking PTT switch. The YD-844 dynamic base
station microphone is an optional accessory made by
Yaesu. Made of a heavy cast metal it uses a dynamic
50K ohm element.

A picture can be seen at
http://www.eham.net/data/classifieds/images/289870.jpg
or
http://www.foxtango.org/ft-library/FT-Library/Eighties/yd-844.jpg

This particular mic works fine and looks very close to new.
No scratches or imperfections. $100


Other Microphones:

Yaesu MH-31 B 8 dynamic hand microphone
This is the Yaesu hand microphone that has the round
8 pin connector on it.  It will go with virtually any Yaesu
rig that uses the round 8 pin connector.  It has up, down,
and fst switches, and well as a tone switch, in addition
to the PTT switch.
This particular unit works 100%, and is still unused in
its original box.  It even includes the new shiny, chrome
mic holder for $40.

Generic Hand Microphone
This is a low impedance hand microphone, black in color.
no connector. $22

Regular hand microphone
Electret Condenser microphone
Generic Black mic, with gray PTT bar. Requires polarizing
voltage. $25

Lafayette EAM-15 dynamic hand microphone
2000 ohm impedance can be used any place a dynamic mic is needed.
Stripped and tinned leads.
It works fine, and looks good also. $25


DTMF Touch Tone Microphones:

Yaesu MH-15a8 Touch Tone DTMF Hand Microphone
Has 16 digit DTMF pad on the back with an Up-Down
switch on the top in addition to the PTT button.
8 pin round connector.  $40

CES 600 L, Universal DTMF microphone
This has a normal touch tone pad on the front, with
a low impedance microphone. This one has the 8 pin
modular plug (like a computer LAN) on it. This mic has
not been used, so it is in really great condition.
With paper work for $40.

Data Signal "Data-Coder 5" touch tone mic
This mic has a 12 digit touchtone pad on it, plus a
normal low impedance microphone. With 4 pin plug.
Like new. $38


Speaker Microphones:

Yaesu MH-34 b 4 b speaker microphone
This is the one that fits the Yaesu VX-8, VX-7, VX-6,
VX-5, VX-3, VX-2, VX-1, and that series of HTs.  I
think it also fits the FT-50 and FT-60, and maybe
others. It has a single 4 conductor, 3.5 mm plug on
it.  This one is just like new. $30

Kenwood SMC-24 speaker microphone
Fits Kenwood TR-2400 HT and others. This one looks
fine and works fine. $18

Yaesu YM-24 A speaker mic.
Fits FT-207, 208, plus many others. It has the
odd little round connector on it like Yaesu, Wilson,
Santec, and others used in the 1970s and 80s.
This particular unit works fine, and looks great
also. $20


Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone  (352) 732-8400