[DCboatanchors] Crystals FS

[Ken Simpson, W8EK]

Does anyone have an older two meter ham rig and need crystals?

Maybe I can help. I have some of both transmit and receive 
2 meter xtals. Most are in the 146 and 147 MHz band segments, 
with very, very few in the 145 MHz segment, and none in the 
144 MHz segment. These are for ham rigs only, and not 
commercial rigs.

These are all the small HC-25 xtals, like were used in most 
of the solid state 2 meter mobiles and HTs. Please e-mail 
the operating frequency you need. I have them listed by 
operating frequency and rig, and not by actual xtal frequency. 
Send the frequencies you need (transmit or receive), and 
the rig that you have, and I will see if I can help. I have cross 
references for the various rigs, so I will know what you need 
if you give the rig. 

I also have 224.94 xmt for Midland 13-509 and most other xtal rigs

440 MHz for SBE-450, and maybe others:
444.20 receive
449.20 xmt

Crystals are $5 each, plus shipping from Florida.

I have special crystals that are used in the Kenwood TS-700
to give crystal control when needed (more stability than the VFO)
146.19
146.64
These are special cut crystals, so they are $10 each.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at speakeasy.net or W8EK at arrl.net
Voice Phone  (352) 732-8400