[CW] CATSync

[D.J.J. Ring, Jr.]

CATSync provides an interface between my radio and the SDR with OmniRIG as
the glue between. I tune the radio and CATSync follows, I tune CATSync and
the radio follows. Pretty neat!

The V1.31 full version costs 9.95€. Available here:
https://catsyncsdr.wordpress.com/

https://wp.me/P9IsLc-4

The CAT Tool for WebSDRs
CATSync allows you to synchronize public WebSDR receivers with your real
rig connected via CAT control to your computer. It supports the classical
WebSDR, Kiwi SDR as well as Open Web RX:

Control any public WebSDR server by means of your real RIG…
Supports a wide number of RIG’s (it uses the popular OmniRig engine)
Supports WebSDR, KiwiSDR and Open Web RX browser-based SDR receivers
Tune the VFO of your radio and see the web SDR follow in realtime !
Click on the WebSDR waterfall and retune your rig in realtime.
Synchronizes both, frequency and mode changes (CW, USB, LSB, AM, FM)
Listen to the same frequency as your rig via web SDR or vice-versa

Ideally suited e.g. for people suffering from local QRM or working in nets

Can track RX or TX VFO (e.g. to find that split of a DX station) if radio
CAT command set of your rig supports both independently

Can be interfaced with popular logging software using OminRig or via VSPE
port splitter.

This software can help you to bring you back into ham radio when you are
suffering from local temporary or permanent high noise levels in an urban
QTH location.

73
David N1EA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/cw/attachments/20260918/06810df9/attachment.html>