[CW] dits]

Mon, 19 Jan 2004 22:04:22 +0100

Hi Ken,
yes you are right, I mean the ration of dots and breaks, will be 1:1
if the meter shows 50%
sri for mistake

73 cwfe Ron, dl5cl
-------------------------------
don`t talk about cw just do it

www.dl5cl.de
----- Original Message -----
From: "Ken Brown" <[email protected]>
To: <[email protected]>
Sent: Monday, January 19, 2004 7:35 PM
Subject: [Fwd: Re: [CW] dits]


>
>
> Excuse me, I believe the following is wrong in two respects.
>
> >Let the needle of the swr-meter hit to the end of
> >the scale (100%), if you hit the bug to the dash site.
> >If you hit the bug to the dots site the meter have to show 50%. So you
can
> >be sure ration dots / dash is 1:3. Finally your bug
> >will sounds pretty good. Of course the metr have to set to peak
> >
> >
> First, you cannot set the dit to dah ratio on a semiautomatic key by any
> of the adjustments. The dit to dah ratio is determined by how the
> operator keys the dahs relative to the speed that the dits are being
> produced by the key. Adjusting the key for 50% power with dits will
> acheive a dit on/off ratio of 50%, which is correct. It is still up to
> the operator to get the correct dit/dah ratio by pressing the dah lever
> for the correct duration.
>
> Second, using an electromechanical meter to indicate average power, will
> work to set the dit on/off ratio to 50% only if the meter does NOT have
> electronics that make it work in a peak reading manner, or if it does
> the peak reading function must be OFF.
>
> DE N6KB
>
>
>
>
> _______________________________________________
> CW mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/cw