[CW] Newbie

[G.E. Tucker]

Pierpont recommends listening to well formed code (e.g. from a tape or
program) a while before trying to send, so as to know better how the letters
are supposed to sound. Otherwise you can pick up bad habits. But at some
point you should start learning to send.

I used a J-38 straight key to learn, and also recommend it. You will need
some kind of oscillator with it.

I now use a Bencher keyer on the air; it's really necessary for higher
speeds, but think everyone should have basic straight key skills too.

73, George W5VU

----- Original Message -----
From: scott <polaraligned@earthlink.net>
To: <cw@mailman.qth.net>
Sent: Sunday, July 28, 2002 10:43 AM
Subject: Re: [CW] Newbie


> Many thanks to everyone for the good advice on learning the code.  And
yes,
> I want to learn code for on the air use and not to just get my license.  I
> really have no interest in voice operation.  The thrill in ham radio seems
> to be in making the contact and telegraphy (in my opinion).
> Question:  I probably should be learning and developing my key pounding
> skills and practicing sending the letters on a key as I learn them.  Does
> this make sense?  What would be a good quality key to get?  Any guidance
> would be appreciated.
>
> Scott
>
>
>
>
> _______________________________________________
> CW mailing list
> CW@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/cw
>