[CVCC] Fw: [Dx4win] Change your default band cutoffs (USA ops only)

[rsmorris]

----- Original Message ----- 
From: "Jim Reisert AD1C" <jjreisert at alum.mit.edu>
To: <dx4win at mailman.qth.net>
Sent: Friday, January 19, 2007 8:40 PM
Subject: [Dx4win] Change your default band cutoffs (USA ops only)


Non-USA readers can skip this.


As a result of the FCC rule changes that took effect in December, you should
modify your band cutoffs.  This will help DX4WIN differentiate CW from SSB
packet spots on the two changed bands.

Go to File -> Preferences -> QSO

Look for CW Frequency Cutoff in the lower-right corner.

  Change the Band box to 80m and the frequency to 3,600
  Change the Band box to 40m and the frequency to 7,125

Then File -> Save Changes and Exit.

73 - Jim AD1C


--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <jjreisert at alum.mit.edu>, http://www.ad1c.us
_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win



-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.17.0/639 - Release Date: 1/18/2007 
6:47 PM