[CTSARA] PTFE tubing for copper wire used for 49:1 balun

[Ilan Grosman]

Thanks Hugo! Appreciate it.

Ilan




On Mon, Dec 2, 2019 at 3:34 PM Hugo W. Catta <hugo at aa1xv.net> wrote:

> https://www.mcmaster.com/ptfe-tubing
>
> On Mon, Dec 2, 2019 at 3:12 PM Ilan Grosman <ilan.m.grosman at gmail.com>
> wrote:
>
>> Hi All!
>>
>> Any good (cheap) sources you can recommend for getting PTFE tubes to use
>> as
>> copper wire sleeves? Building a 49:1 transformer and want to replicate
>> balun designs approach.
>>
>> Thank you, and see you on Dec 5th.
>>
>> Ilan
>> ________________________________________________
>> CTSARA mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/ctsara
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:CTSARA at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>> All posts must be sent in Plain Text, no HTML. Links will Function. No
>> attachments are allowed.
>>
>> Unsubscribe from CTSARA: http://mailman.qth.net/mailman/listinfo/ctsara
>>
>> Analog Repeaters:
>> "S": 146.655MHz -600KHz PL 114.8 Hz
>> "H": 146.655MHz -600KHz PL 100 Hz
>>
>> DMR: 447.125 Out 442.125, Color Code 2
>> (Listen here)
>> https://www.broadcastify.com/listen/feed/21651
>>
>
>
> --
> Hugo - AA1XV
> *"I hear and I forget. I see and I remember. I do and I understand."* -
> Confucius.
>