[CTSARA] [GNARC] 1N4454 Equiv. Diode

[Steve Dick]

not critical as long as you meet the max voltage and current requirements 
greater than or equal to the 1n4454 50V 200mA, in the same package size. 
(DO-35).  You can order them from mouser.com (10 cents each or 7.5 cents for 
qty 10.)  You'll pay more for the shipping than the diodes!! If you don't 
need the exact physical size, you can use the common 1N4004s rated at 400V 
1A from Mouser (4 cents each) or 3.5 cents qty 25, Mouser PN 583-1N4004-T in 
a DO-41 package

-----Original Message----- 
From: Tom Alessi
Sent: Monday, May 23, 2016 11:21 AM
To: gnarc
Cc: ctsara Mailman
Subject: [GNARC] 1N4454 Equiv. Diode

I am doing a mod to my IC-756 Pro II and the mod calls for four 1N4454
switching diodes to isolate 2 low current relays in a switching matrix.

I think the diodes are regular old, dime a dozen switching diodes.  Does
anyone know if Radio Shack has anything close?

I'm actually thinking of throwing 4 diodes from my junk box in there as I
cannot see that it would make much difference.

Any ideas/suggestions?

Thanks.

Tom Alessi
Tom at K1TA.com  |  www.K1TA.com
C: (203) 253-7745 | O: (914) 231-1691 | F: (914) 813-4091
*"CW Forever !"* Look for me on 20m, 30m or 40m CW
______________________________________________________________
GNARC mailing list
Home: http://mailman.qth.net/mailman/listinfo/gnarc
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GNARC at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html 


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus