[Collins] Modifying the Neurtalizing Circuit

[Carl]

If that was mine Id sweat on a brass hex nut to the cap rotor so 
neutralization does not require removing the cabinet. Do it fast with a big 
gun so as to not melt the solder from the rotor plates. Use a hard plastic 
or other non conductive nut driver.

And yes the 6146B family work just fine unless they are grossly mismatched 
but the 6146 has the same caveat.

Carl
KM1H
----- Original Message ----- 
From: "David Knepper" <collinsradio at comcast.net>
To: <collins_radios at yahoogroups.com>; "Collins Radio Association" 
<collins at mailman.qth.net>
Sent: Saturday, September 20, 2014 3:19 PM
Subject: [Collins] Modifying the Neurtalizing Circuit


> http://www.qsl.net/dj7hs/kwm-2-neutr.htm
>
> Great technical article to modify the original neutralizing circuit in 
> your Collins.
>
> David Knepper - W3CRA/W3ST
> Collins Radio Association
> www.collinsra.org
> Join the CRA today
> ______________________________________________________________
> Collins mailing list
> Home: http://mailman.qth.net/mailman/listinfo/collins
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Collins at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4765 / Virus Database: 4025/8246 - Release Date: 09/20/14
>