[Collins] KWS-1

[THOMAS GRIECO]

That is exactly what I have been looking for, local help. I live in Ct.
The voltage was 9 on the left meter with finals in and jumped to 11 once 
finals removed.

On Mon, Apr 22, 2013 at 9:01 PM, Brian Harris wrote:

> Was the voltage 11 at the final sockets with the finals in?  That is 
> almost impossible.   It might be possible if the finals were out and 
> your line voltage is really high.....like 130.  Please give us more 
> details.
> The kws1 is a complex rig.  You would be well advised to have a local 
> with experience help you out.
> Brian wa5uek
>
> Sent from my iPhone
>
> On Apr 22, 2013, at 7:05 PM, THOMAS GRIECO <tgrieco at optonline.net> 
> wrote:
>
>> This radio has been in my possession for years. Trying to get it on 
>> the air, but with difficulty
>> Initial adjustments with filament switch on, PA Filament voltage is 
>> 11 instead of six. Blower on. The Plate light will not turn on 
>> either.
>> I am not technical at all so please bear with me. I have tested all 
>> tubes and fine. Fuses are ok. Input power at 115 vac.
>> Suggestions? Pulled PA tubes out for now.
>>
>> K1SYN
>> ______________________________________________________________
>> Collins mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/collins
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Collins at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html