[Collins] 32S-3 driver and PA tube screen resistors

[Bob and Sue Jefferis]

Thanks to everyone that responded. The squares are filled.

73, Bob, KF6BC
On May 22, 2012, at 9:04 PM, Dr. Gerald N. Johnson wrote:

> 2nde ed Rockwell 32S-3A dated 1 Dec 1975 has 12K 1 watt carbon comp for 
> R41. Shows R113 as 1.75K 3 watt wire wound.
> 
> 7th ed 32S-3 manual dated 1 May, 1969, shows R113 as 1.75K 3 watt, R41 
> as 22k 2 watt carbon comp.
> 
> My 32S-1 manual 7th ed June 1960 shows R113 as 2.5K 7 W, wire wound. 
> Shows R41 as 22K 2 watt carbon comp.
> 
> 32S-1 10th ed dated 15, Nov 1961 (but with Rockwell ID), shows R41 as 
> 22K 2 watt carbon comp and R113 as 1200 ohm 2 watt carbon comp.
> 
> Sure wish we had access to the MCN for these rigs, then we could trace 
> the history of circuit mods easily.
> 
> 73, Jerry, K0CQ, Technical Adviser to the Collins Radio Association.
> 
> On 5/22/2012 7:50 PM, Bob and Sue Jefferis wrote:
>> Greetings,
>> 
>> I am just trying to fill a couple more squares in my notes on
>> component evolution. All of the 32S-3 manuals call for  R41 at V7
>> pins 8 and 3 to be 22k Ohms, 2 Watt. I am wondering if the 1973 or
>> 1975 32S-3A manuals show that it was changed to 12k Ohm, one or two
>> Watt?
>> 
>> Similarly, all of the 32S-3 manuals call for R113 feeding the PA
>> screens to be 1750 Ohm, 3 Watt. Do the later 32S-3 manuals show that
>> it might have been changed back to 1200 Ohms as it was in the 32S-1?
>> 
>> Thanks for any information on this question.
>> 
>> 73, Bob, KF6BC
>> 
> ______________________________________________________________
> Collins mailing list
> Home: http://mailman.qth.net/mailman/listinfo/collins
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Collins at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html