[Collins] checking chokes,516-f2

[Al Parker]

looks to me like your meter may be reading abt 20% low.  But all those 
chokes could be lower than the values in the manual I suppose.  I 
wouldn't worry much about those values, particularly since they are all 
about the same % off what you  expected.
73,
Al, W8UT
www.boatanchors.org
www.hammarlund.info

"There is nothing -- absolutely nothing -- half so much
worth doing as simply messing about in boats"
Ratty, to Mole

On 5/30/2011 2:44 PM, yash at aol.com wrote:
>
>   Was checking all three chokes in the supply,I see where they are listed on the schematic  as 200,200 and 25 ohm. After testing ,both wih my vtvm and my dmm read as follows:
> 1. L1= 155 ohm
> 2. L2= 157 ohm
> 3. L3= 20.3 ohm
>    Are these normal values in the real world?
>   thanks
> dale wt4t
>
>
>
>
> ______________________________________________________________
> Collins mailing list
> Home: http://mailman.qth.net/mailman/listinfo/collins
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Collins at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>