[Collins] Shipping Advice Request

[Fern]

Good evening George.  I would remove the 516F2 from the cabinet and pack the 
power supply seperate from the cabinet. The cabinet and rectifier tubes can 
go in same box. Otherwise, the cabinet of the 516F2 will definitely get 
damaged/distorted in transit.   73 from Fern   VE7GZ


----- Original Message ----- 
From: <k8qm at nc.rr.com>
To: <collins at mailman.qth.net>
Sent: Tuesday, February 16, 2010 1:49 PM
Subject: [Collins] Shipping Advice Request


> All,
>
> I'm going to be selling a KWM-2, 516F-2 and 30L-1 soon and would 
> appreciate a sanity check on my plans. I do have access to a foam-in place 
> machine at work which should be a big help.
>
> KWM-2 Wrap in heavy duty plastic and use foam in place in a box that 
> leaves a couple of inches on all sides. Should I pack bubble wrap inside 
> the unit to keeps tubes from displacing?
>
> 516F-2 Remove tubes and pack in a separate box, wrap the power supply and 
> use foam in place as above.
>
> 30L-1 Remove the 811s and pack in a separate box, wrap the 30L-1 and use 
> foam in place as above.
>
> Any other suggestions (I can't keep them and haven't been able to find a 
> buyer locally).
>
> Thanks,
>
> George (K8QM)
> ______________________________________________________________
> Collins mailing list
> Home: http://mailman.qth.net/mailman/listinfo/collins
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Collins at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.435 / Virus Database: 271.1.1/2689 - Release Date: 02/15/10 
07:35:00