[Fwd: RE: [Collins] Need 516F-2 replacement choke source]

[Dr. Gerald N. Johnson]

-------- Forwarded Message --------
> From: Robert Jefferis <jefferis at antelecom.net>
> To: rls19 at psu.edu, 'David' <texasroadrunner at comcast.net>,
> collins at mailman.qth.net
> Subject: RE: [Collins] Need 516F-2 replacement choke source
> Date: Sun, 10 Aug 2008 13:52:22 -0700
> Dave,
> 
> You might try Heyboer Transformers www.heyboertransformers.com  They made a
> direct replacement for the 516F-2 chokes. I purchased 4 of them back in '04.
> At the time their description was "8 Hy 6680300-00, HTS-6982. If that
> description doesn't work, tell the person you talk to look up the "Bill
> Abate" file. These chokes have end bells on both sides. For L1 I simply
> (actually, very carefully) removed one of the bells to fit the chassis hole.
> These brought 2 F2s back to life and have been just dandy. 
> 
> Bob, KF6BC
> 
> -----Original Message-----
> From: collins-bounces at mailman.qth.net
> [mailto:collins-bounces at mailman.qth.net] On Behalf Of Bob Spooner
> Sent: Sunday, August 10, 2008 11:05 AM
> To: 'David'; collins at mailman.qth.net
> Subject: RE: [Collins] Need 516F-2 replacement choke source
> 
> Dave,
> 
> Triad has a 10H choke with a slightly lower resistance that may work. I
> recently ordered one from Allied to replace a 12H choke in a 310B and it
> works fine.
> 
> 73,
> Bob  AD3K
> > 
> > Need 516F-2 power supply choke L1 (8H 200 ohms).
> > May I impose on the list member expertise to suggest a reasonable
> > replacement/substitute source for this?
> > thanks in advance
> > -dave
> > W5OC
> > 
> 
> 
> 
> ______________________________________________________________
> Collins mailing list
> Home: http://mailman.qth.net/mailman/listinfo/collins
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Collins at mailman.qth.net
> 
> 
> 
> ______________________________________________________________
> Collins mailing list
> Home: http://mailman.qth.net/mailman/listinfo/collins
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Collins at mailman.qth.net