[Collins] RF connectors for 312B-4

[Jim Brannigan]

They are available all over the place.  I made up a cable with a PL-259 for
the 32S-3 (yes I changed the connector) and an N connector on the other
side.  The same for my OMNI-VI+ (I use a 312B-4 on that also)
Beware of cheap right angle connectors!!!!
I bought some at a flea market.  After I got home I dropped one and it fell
apart!!!!  It was not a machined one piece shell and the center connectors
were loosely pressed together.  I threw the rest out and bought some
Amphenols....

Jim

> You can get the type "N" connectors all over the place
> including Mouser ( http://www.mouser.com ).  They are
> available in the "old" solder / mechanical clamp and
> in the newer "crimp on".  They are available for
> RG58/U and the RG8/U family among others.
>
> Not much more expensive than a good PL-259!
>
> Also, I do furnish ready made cables.  For more
> information check the Zcomco website that is listed at
> the end of this message.
>
> Glen, K9STH