[Collins] KWS-1 ALC to Test Key Modification ?

[Roger Shultz]

A KWS-1 that I am working on has the modification to move the ALC control to
the chassis and has the Test Key switch mounted on the panel with a small
lettering panel behind it.

The problem and hence the question is when I dropped the front panel, one of
the wires came off the Tune-Operate switch. Two other clipped wires were
also there which I believe to be associated with the modification and
associated with the ALC control. None of the service bulletins seem to cover
the modification so I can't determine easily which wire(s) go to the
Tune-Operate switch and which ones should be insulated and left in the
harness.

If anyone has information about the modification, I would be most grateful.

73, Roger NJ2R