[Collins] Query about 6m transverters and S-line

[Jim Brannigan]

Some time ago I gave a hard look at using the TT 14Mcs.  to 6M transverter
with a 32S-3/75S-3B  vs. a TT OMNI-VI+
I worked out all the switching and drive problems. It looked like a good
fit.  While I was doing this I acquired a 62S-1, so I never got to put the
theory to practical application.
The 62S-1 is a sweet solution to the problem. (but a bear to work on)

Jim


> There are some limitation using the Tentec transverter with the S-line.
>
> First the Tentec expects a transceiver, because its IF out and IF in are
> on the same connector. That could be remedied with some circuit changes
> adding a connector and disconnecting some of the switching.