[Collins] Boat Anchor Fans

Jim Brannigan [email protected]
Fri, 18 Apr 2003 08:11:14 -0400


I don't get all this "fancy fan" stuff.
A 110VAC muffin fan on top of the cabinet with stick-on rubber feet and an
in-line lamp cord switch works very well.
Periodic cleaning, particularly power Amps., is a must.
Wipe off the tubes and clean the fan blades with "Simple Green" and a paint
brush.
There is a vacuum cleaner reduction kit sold for use on computers.
An attachment reduces the standard vacuum cleaner hose to a 1/2 inch tube
about two feet long.   Small brushes and a crevice tool are included.
It does a great job.
Speaking of dust.  If you want your computer to last, open the case and
vacuum clean the power supply fan openings and CPU fins.
Jim


> The result is going to be some dust in the cabinet. The solution to any
dust?
> ---- Forget the filters, just do a periodic cleaning of the interior.
>
> My preference was to put a fan on top of the cabinet and suck the hot air
> out. Hot air rises anyway so you get some efficiency from just pulling the
> hot, rising air on out of the cabinet and letting cooler air flow in from
the
> bottom and the sides.
>
> tim gorman [email protected]
>
> On Thursday 17 April 2003 08:18 pm, Al Parker wrote:
> > Dave,
> > ? ? I beg your pardon -- every bit of air that goes out thru the fan has
to
> > be replaced by air coming into the cabinet. ?That air can also carry
dust.
> > Since it may be of lower velocity than the air passing thru the fan, it
may
> > not carry as much dust as it would if the fan was blowing in, but it
will
> > carry dust in.
> > ? ? Unless Collins units have some special feature that I'm not aware
of.
> > 73,
> > Al, W8UT