[Central-Electronics] Sideband Slicer

[W1LSB - George]

Nice going Colin!  

I found that the CE Slicers do work better on National receivers in general,
and especially the HRO-50/60.  For whatever reason, the National AGC
circuits seem to match the Slicers better than Collins.  Never tried one
with Hallicrafters, but I did use one on my GPR-90 and it was decent there
also.  Others on the list may have some additional experiences to share. 

73, George - W1LSB

-----Original Message-----
From: central-electronics-bounces at mailman.qth.net
[mailto:central-electronics-bounces at mailman.qth.net] On Behalf Of Colin Lamb
Sent: Wednesday, May 10, 2023 12:51 PM
To: central-electronics at mailman.qth.net
Subject: [Central-Electronics] Sideband Slicer

I got a Sideband Slicer from a swap meet.  It had the Q multiplier in it.  I
recapped it and hooked it up to a HRO-50.  It works great.  On SSB you can
have the receiver on AM and have full gain control and the S meter.  Signals
sould great.  Wonderful addition for copying SSB and the HRO.  It also works
with the HR-60, a 75A-2 and an SX-71.  The HRO 50 and 60 are perfect.

K7FM,  Colin
______________________________________________________________
Central-Electronics mailing list
Home: http://mailman.qth.net/mailman/listinfo/central-electronics
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Central-Electronics at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html