[Central-Electronics] MM-2, plug when no RM adapter?

[Jon Kannegaard]

Hello Dennis,

Yes, I checked the cap connection. I was hoping for something trivial to explain it never triggering. I have fiddled with the under chassis pot that’s supposed to adjust that but to no avail. Obvious parts have been replaced, including that cap. Tubes good.

I guess I’ll have to actually dig into a bit.

Incidentally, the CRT was dead, open filament. Gary, K6GLH came up with one. I still talk with him occasionally on 75. 

Thanks,

Jon


> On Apr 30, 2022, at 3:12 PM, Dennis Petrich <radioden45 at gmail.com> wrote:
> 
> No, inside the unit there is a capacitor that plugs into one pin connector to bypass the RM adapter.
> 
> Sent from my iPhone
> 
>> On Apr 30, 2022, at 5:08 PM, Jon Kannegaard <k6jek at comcast.net> wrote:
>> 
>> Trying to get a MM-2 going. When there is no RM adapter, does there need to be a plug in the socket to jumper something?
>> 
>> Thanks,
>> 
>> Jon
>> 
>> ______________________________________________________________
>> Central-Electronics mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/central-electronics
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Central-Electronics at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Central-Electronics mailing list
> Home: http://mailman.qth.net/mailman/listinfo/central-electronics
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Central-Electronics at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html