[Central-Electronics] Fw: Re: CE 458 VFO Output Level

[Paul Christensen]

Colin, Tom, & George,

Thanks for the feedback.  I recently received a second CE458 that's working
fine.  It will be used to assist with troubleshooting.  When there's a
working unit to compare, I find my troubleshooting time is greatly
accelerated.  

Colin, I have a Rigol DG1062Z AWG.  Its unloaded output is 20 Vpp.  So, it
should work much like your FY6600 when I want better frequency stability.
I'll give it a try.

Paul, W9AC



-----Original Message-----
From: central-electronics-bounces at mailman.qth.net
<central-electronics-bounces at mailman.qth.net> On Behalf Of Colin Lamb
Sent: Monday, August 5, 2019 11:28 PM
To: central-electronics at mailman.qth.net
Subject: [Central-Electronics] Fw: Re: CE 458 VFO Output Level




->Subject: Re: [Central-Electronics] CE 458 VFO Output Level
>
>Recently I purchased a digital FY6600 or a FY6800.  There is a small
difference in price.  I bought one but it is another QTH.  It works great.
I can set the output to 7 volts.  It has sine wave or any other type of
wave.  It easily sets to the nearest Hertz.  Goes up to 60 Mhz.  No drift.
The bC-458 triples on 40 meters.  This thing is small and works great.
>
>Colin  K7FM
______________________________________________________________
Central-Electronics mailing list
Home: http://mailman.qth.net/mailman/listinfo/central-electronics
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Central-Electronics at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html