[Central-Electronics] 100V/200V tuning knobs

[Donald Ball]

Hi, I did this and there is a trick to it. I had to use a long spare shaft
to hold the parts together while doing this. You will want to do this in a
large bowl as it will come apart and bearings will fall out constantly. I
also recommend some grease as it will help hold bearings in place.

Don
KE1MB

On Wed, Feb 14, 2018 at 9:18 PM, Robert Sauvan <rsauvan at beyondbb.com> wrote:

> Hi all,
>
> I am in the process of refurbishing a 100V along with the PTO. While
> waiting for my new bearings to arrive for the PTO, I  needed to take the
> tuning knob assembly apart. I cleaned it all up and greased the bearings
> and have tried to put it back together. Im sure I have it assembled
> correctly but am having issues getting the spring steel plate screwed back
> on. So, of course Im doubting whether I am putting it back together
> correctly. Instead of getting into details as they would be too lengthy for
> an email, Im wondering if anyone has a schematic of the assembly of this
> unit, has done one and can give me pointers, or possibly send pictures of
> one you have done as a guide? Anything would be helpful.
>
>
> Thanks-Bob-W0YBS
>
> --
> Thanks
> Bob Sauvan-W0YBS
> rsauvan at beyondbb.com
> http://w0ybs.com
>
> ______________________________________________________________
> Central-Electronics mailing list
> Home: http://mailman.qth.net/mailman/listinfo/central-electronics
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Central-Electronics at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html