[Central-Electronics] Carrier supression on CE100V

[Fallon, Joseph]

Hi George,

I used 1n5711 Schottky  diodes that I matched the Vf to less the 1%.  The caps were replaced with 10uF, 50V electrolytics with 20% tolerance.

73’s

Joe WA1IWQ

From: George Maier [mailto:george at maiergroup.com]
Sent: Tuesday, January 29, 2013 9:51 AM
To: Fallon, Joseph
Cc: central-electronics at mailman.qth.net
Subject: Re: [Central-Electronics] Carrier supression on CE100V

Hi Joe:
Did you match the diodes and caps?
73, George- W1LSB

Sent from my Verizon Wireless 4G LTE DROID


"Fallon, Joseph" <joe.fallon at philips.com<mailto:joe.fallon at philips.com>> wrote:

Hi Folks,

    Anyone know the typical spec for the carrier suppression of the CE100V?  Replaced the Mod diodes and Caps, tweaked  the 8MHz osc and I'm seeing about 35db which still seems to be on the low side?

    Tnxs,

    Joe WA1IWQ


________________________________
The information contained in this message may be confidential and legally protected under applicable law. The message is intended solely for the addressee(s). If you are not the intended recipient, you are hereby notified that any use, forwarding, dissemination, or reproduction of this message is strictly prohibited and may be unlawful. If you are not the intended recipient, please contact the sender by return e-mail and destroy all copies of the original message.
______________________________________________________________
Central-Electronics mailing list
Home: http://mailman.qth.net/mailman/listinfo/central-electronics
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Central-Electronics at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html