[Central-Electronics] Central-Electronics Digest, Vol 104, Issue 3

[Bruno Ortega]

Hi to the Group.
Jimmy, I think the 5 pin plug is for an AP-1 adapter (if the receiver have a 
450-500 Kc IF, as your Hammarlund), or AP-2 adapter (crystal controlled, 
having another IF fec). The AP adapters are adds-on, to connect the slicer 
easily to the receiver, but you can connect without this adds-on. You can 
see how, in the slicer manual. Search in BAMA web -CE-
Vy 73's from Europe
Bruno-EA7FEB

> Today's Topics:

   1. CE Slicer and Sp 600-JX-17 (Jimmy Green)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 18 Feb 2013 22:36:13 -0600
> From: "Jimmy Green" <honobia061960 at hughes.net>
> To: <central-electronics at mailman.qth.net>
> Subject: [Central-Electronics] CE Slicer and Sp 600-JX-17
> Message-ID: <62ACE23175664C99BBA4D930CEC6D30C at Dell270>
> Content-Type: text/plain; charset="iso-8859-1"
>
> I have a Central Electronics B slicer w/Q multiplier. I would like to 
> connect to a Sp 600-JX-17.  There are 4 RCA and one 5 pin plugs on the 
> back of the slicer. One RCA labeled IF in, One Vol.Cont., One Rec. Det., 
> and one AF out.  The 5 pin plug I have know idea where are what it connect 
> too.
> Will someone please tell me how to connect the 2 units. I do not wish to 
> cause smoke.
> Thank you in advance,
> Jimmy K5CSU
> 


__________ Información de ESET Smart Security, versión de la base de firmas de virus 8028 (20130219) __________

ESET Smart Security ha comprobado este mensaje.

http://www.eset.com