[Central-Electronics] 200V driving aCollins 30S1

[George Maier]

Hi Jimmy:

If the Dow Key has spare contacts, you can use them to key the T/R switching
in the 30S-1.  I use my 200V regularly to drive either a 30L-1 or a BTI
LK-2000, and have never had a problem with drive or distortion. I do use a
CE MM-2 scope to monitor the modulation, but you should be able to achieve
similar results by staying with the 200V limits as presented on its scope. 

73 & have fun,

George - W1LSB

-----Original Message-----
From: central-electronics-bounces at mailman.qth.net
[mailto:central-electronics-bounces at mailman.qth.net] On Behalf Of Jimmy
Green
Sent: Wednesday, February 02, 2011 3:38 PM
To: central-electronics at mailman.qth.net
Subject: [Central-Electronics] 200V driving aCollins 30S1

Please give me a litle help, the 3 connections on the 30S1 are RF in from
the exciter, Antenna relayand ACL.
The 200 V power out is know problem.  I had plan on using a 115 dowkey relay
on the back of  the 200v.  I do not have ALC so will need to watch mic gain
(I think). Now the antenna relay need help.
I would very much appreciate the forums imput.
Thank You
Jimmy K5CSU
______________________________________________________________
Central-Electronics mailing list
Home: http://mailman.qth.net/mailman/listinfo/central-electronics
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Central-Electronics at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__________ Information from ESET Smart Security, version of virus signature
database 5841 (20110202) __________

The message was checked by ESET Smart Security.

http://www.eset.com


 

__________ Information from ESET Smart Security, version of virus signature
database 5924 (20110303) __________

The message was checked by ESET Smart Security.

http://www.eset.com