[Central-Electronics] CE 10B alignment.

[KEN]

Hi Fellows,

I had very good success aligning my CE 10B way back in the 60's & 70's using my trusty olld Hammrlund HQ-129-X receiver 
and an old BC 221 frequency meter. I did this periodically, every six months.
After a 2 hour warmup of equipments, I used the S meter on the receiver and the signal generator (BC 221).
Of course I had a darn good SSB Adapter, a TMC GSB-1
Tune the adapter to the opposite sideband and adjust 10B for minimum dip on the S meter. Had no problems what-so-ever! 
Never got a bad signal quality report or poor unwanted sideband suppression.
FWIW,

Ken   N5CM