[Central-Electronics] 100V-200V Cabinet

[brockhouse raymon]

I am looking for a 100V cabinet. Let me know what you have?  I have a 100V & a 200V, on
the 100V I can get both sidebands nulled perfect but on the 200V LSB is good and USB not so good or the other way around. I have matched MOD CAPS and Silicon matched diodes. 
The 2 caps in the PS2 off the plate feeding the PS2 were leaky on both units. One was 4710pf and the other 1850pf. I used 2 silver micas for each to get the proper size and checked the size on a CAP. meter. This worked perfect. If you have a different voltage than 
.8 votls on the grid of the tube following the PS2  I believe these caps are probably bad. Two of them measured 80 megs on a VTVM but the other two were above 100 meg but replacing them fixed the problem. Both of these CAPS were bad on the 100V & 200V.  Any ideas on getting both sidebands equally down? Thanks.
Ray
 
 
  


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/central-electronics/attachments/20090116/5523a6aa/attachment.html