[Central-Electronics] Update on my 200V operation

[David Griffin]

I have my 20Aon the air most nights for cw on 80 meters.   I run its output
into a small homemade amp (built from the bolt-on PA from a FT 301,)
putting about 50 watts on the air and listening with my HQ145x or SX122a.
I also run my B&W 5100 and my Harvey Wells TDS50D on 80 cw.
Dave
n2chi
----- Original Message ----- 
From: <reso0h41 at verizon.net>
To: <central-electronics at mailman.qth.net>
Sent: Thursday, July 17, 2008 8:48 AM
Subject: [Central-Electronics] Update on my 200V operation


> Just a quick note on my 200V that everyone helped me get back on the
> air.
> It is working great and I am getting very good signal reports from it.
> When operating my Yaesu FT-920 gets a little ho-hum I switch off to the
> 200V, sometimes for a couple of weeks, and it brings back the excitement
> of operating REAL radios.
> Really great fun and it generates lots of great conversation on the air.
> If you have a CE rig or any other tube boat anchor I would encourage you
> to blow off the dust and fire it up.
> All the best.
> Dave
> W4PBU
> _______________________________________________
> Central-Electronics mailing list
> Central-Electronics at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/central-electronics
>