[Central-Electronics] BC-458 Power out

[George Maier]

Hi Ron:
The schematics I have for all of the CE exciters (10A, 10B, 20A) have a note
by the VFO input plug that specifies 8 RF volts MAX.  I'm assuming that's an
RMS value, but there's no confirmation on the diagram. 
I'll put a scope on it next time I run the 10B with its 458 VFO.
73 & keep em glowing!
George - W1LSB

-----Original Message-----
From: central-electronics-bounces at mailman.qth.net
[mailto:central-electronics-bounces at mailman.qth.net] On Behalf Of K3PID
Sent: Sunday, March 04, 2007 2:22 PM
To: Central-Electronics at mailman.qth.net
Subject: [Central-Electronics] BC-458 Power out

Just finishing up a lengthy project which included a ground up modification
of a BC-458 and a more or less minor restoration of a 20A.  I can't seem to
find any numbers for the expected output of the BC-458. Anyone know what the
drive wattage is supposed to be from the BC-458 VFO? Or maybe more
importantly, what is the required input drive for the 20A to get rated
output?

K3PID
Ron H.


This email was scanned by 
Norton Antivirus Corp. Edition
and found to be virus free!
_______________________________________________
Central-Electronics mailing list
Central-Electronics at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/central-electronics