[Central-Electronics] 100V/200V Panel And Cabinet Refinishing

[Bob Sullivan]

CE listmates;

I work with Howard from time to time and wanted to clarify the info sent by=
=20
Bob, AB3L, just a bit.
Howard and I talked about this just this morning.

Prices for 100V/200V panels (including the two doors)

$95 if included as part of a complete restoration
$125 if you are willing to wait until we have at least 5 panels to do
$150 if you send only one panel

Prices for 100V/200V cabinets

$175 if included as part of a complete restoration
$200 if you are willing to wait until we have at least 5 cabinets to do
$225 if you send only one cabinet

If additional repairs are required on cabinet or panel (fill holes, fix=20
dents, etc) these prices will increase depending on the extent of the=20
repair. Prices do not include shipping.

I'll have a restored 100V at Dayton that includes the panel and cabinet by=
=20
Howard. Come by and take a look - spaces 1550/1551. I'll also have a 600L=20
with a cabinet repaired/refinished by Howard.

73, Bob
W=D8YVA
My station: http://www.isquare.com/personal_pages/hardware-14.htm




>I wanted to pass on the availability of this service. Howard Mills has the
>screens to do the 100V and 200V front panels. His price for the blast,=20
>paint and
>screening is $95.00 plus the return postage.
>
>He also will do the cabinet blast and powdercoat for $175.00 plus the=
 return
>postage.
>
>If you have seen his work you know of the quality.
>
>I didn't see any mention in the archives of anybody doing this work so I
>thought I would share the info. I receive no compensation for the notice.
>
>You can contact Howard by phone 304-876-6483 or W3HM@nfis.com
>
>Have fun,
>Bob AB3L