[Central-Electronics] Help needed on spurs in 100V

[Jon Pevner]

Hi folks;

    I have serial no. E350 with the mixer mods installed.  However, I seem
to have some pretty serious spurs. With the TX set at 7200,  I see leakage
of the 8MC at about -50 below carrier, leakage of the VFO at about the same,
and some sort of intermod product at 6100 which is at about -40 db.
Adjusting the post, this is about the best I could get. It seems as if the
mods were put in to spec. Not quite good enough to put on the air, also, the
mod sheet from CE talks about everything being -50 or better.

TIA, de N1LIS (Jon)