[Central-Electronics] 200V ser # 1419

Thu, 11 Apr 2002 09:49:03 -0400

Hi Gary:
In case you missed the posting, the info is now up on Ken's BAMA site.
Enjoy !!!
George - K1GXT

Gary D Elliott wrote:

> Hi George
>
> I have a 100V and sure would like to get a copy of the Alignment
> instructions and service information.  Can you sent it to me as an
> attachment or tell me where I could download this info. Thanks
>
> 73 Gary
>
> ----- Original Message -----
> From: "George Maier" <[email protected]>
> To: <[email protected]>
> Sent: Tuesday, April 09, 2002 01:12
> Subject: Re: [Central-Electronics] 200V ser # 1419
>
> > Hi Ken:
> > I have a seven page CE factory document entitled "100V - 200V Alignment
> > Instructions and General Service Information" that I'll scan for you. It
> was
> > not part of the original manuals, and contains some good tips, including
> > audio module maintenance. I figure I owe it to you, after all the good
> info
> > I've downloaded from your site.
> > Vy 73
> > George Maier - K1GXT
> >
> > "Kenneth D. Grimm, K4XL" wrote:
> >
> > > I would like to add any information about the octal plugs with diodes to
> > > the 100V and 200V folders on BAMA.  So, if anyone can provide that
> > > information, I will make sure that it is available to anyone that wants
> > > it in the future.  Also, while I'm begging for information, I have a
> > > couple of pages in the 100V manual giving typical voltages.  The 200V
> > > manual that I have on BAMA doesn't have similar pages.  I wonder if they
> > > were left out of the one that I scanned, or if they simply were never
> > > put in the 200V manual the way they were with the 100V.  As I'm about to
> > > start trouble shooting a 200V, a voltage chart would be a BIG help!
> > > Thanks and 73,
> > > Ken K4XL
> > > [email protected]
> > > *** BoatAnchor Manual Archive ***
> > > On the web at http://bama.sbc.edu or
> > > FTP site info: bama.sbc.edu login: anonymous p/w: youremailadr
> > >
> > > ----- Original Message -----
> > > From: "J C White" <[email protected]>
> > > To: <[email protected]>
> > > Sent: Monday, April 08, 2002 5:51 PM
> > > Subject: Re: [Central-Electronics] 200V ser # 1419
> > >
> > > > just found a notation in margin of my 200 V manual that some 100V came
> > > > with octal plugs per a mod suggesteid my a ham. Many only the lst have
> > > a
> > > > copy of this mod from original puplicaation.  Serhaps soomeone would
> > > be
> > > > kind enough to share with us the diode polug in mod.  Best test is to
> > > use
> > > > the
> > > > onboard scope with and without compressor and compare.  Also, the
> > > > 200V is subject to arcing in final  10M broadband coil at SWR about
> > > 3:1..the
> > > > liquid rubber available for decorating car tire sidewalls will stop
> > > this but
> > > > obviously better to work into proper load!
> > > >
> > > > how bout itguys....anyone willing to scan and send us the diode mod or
> > > post
> > > > to
> > > > a site where we can download?  I lost mine years ago...yes I
> > > know...grey
> > > > matter
> > > > first part of body to turn to centent!
> > > >
> > > >
> > > > _______________________________________________
> > > > Central-Electronics mailing list
> > > > [email protected]
> > > > http://mailman.qth.net/mailman/listinfo/central-electronics
> > >
> > > _______________________________________________
> > > Central-Electronics mailing list
> > > [email protected]
> > > http://mailman.qth.net/mailman/listinfo/central-electronics
> >
> > _______________________________________________
> > Central-Electronics mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/central-electronics
>
> _______________________________________________
> Central-Electronics mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/central-electronics