[Central-Electronics] 200V ser # 1419

Tue, 9 Apr 2002 00:41:26 -0400

Mike,
That would be great!  I would really like to have it for my own use as
well as add it to the 200V material on BAMA.  Thanks very much, OM,
73,
Ken K4XL
[email protected]
*** BoatAnchor Manual Archive ***
On the web at http://bama.sbc.edu or
FTP site info: bama.sbc.edu login: anonymous p/w: youremailadr

----- Original Message -----
From: "Michael Tallent" <[email protected]>
To: <[email protected]>
Sent: Monday, April 08, 2002 8:07 PM
Subject: Re: [Central-Electronics] 200V ser # 1419

> I just looked in the 200V manual that I bought directly from CE in
1963 for
> $3, at the time that was all I could afford, it has no voltage chart.
I
> then looked in the manual that came with my 200V, serial 1488, that I
bought
> in 1989 and it has a one page voltage chart and another page for RF
> voltages.  I can scan these and send them to you by e-mail if that is
OK.  I
> will make sure they are readable :-).
>
> Mike Tallent W6MXV  in KY
>
> ----- Original Message -----
> From: "Kenneth D. Grimm, K4XL" <[email protected]>
> To: <[email protected]>
> Sent: Monday, April 08, 2002 7:08 PM
> Subject: Re: [Central-Electronics] 200V ser # 1419
>
>
> > I would like to add any information about the octal plugs with
diodes to
> > the 100V and 200V folders on BAMA.  So, if anyone can provide that
> > information, I will make sure that it is available to anyone that
wants
> > it in the future.  Also, while I'm begging for information, I have a
> > couple of pages in the 100V manual giving typical voltages.  The
200V
> > manual that I have on BAMA doesn't have similar pages.  I wonder if
they
> > were left out of the one that I scanned, or if they simply were
never
> > put in the 200V manual the way they were with the 100V.  As I'm
about to
> > start trouble shooting a 200V, a voltage chart would be a BIG help!
> > Thanks and 73,
> > Ken K4XL
> > [email protected]
> > *** BoatAnchor Manual Archive ***
> > On the web at http://bama.sbc.edu or
> > FTP site info: bama.sbc.edu login: anonymous p/w: youremailadr
> >
> >
> > ----- Original Message -----
> > From: "J C White" <[email protected]>
> > To: <[email protected]>
> > Sent: Monday, April 08, 2002 5:51 PM
> > Subject: Re: [Central-Electronics] 200V ser # 1419
> >
> >
> > > just found a notation in margin of my 200 V manual that some 100V
came
> > > with octal plugs per a mod suggesteid my a ham. Many only the lst
have
> > a
> > > copy of this mod from original puplicaation.  Serhaps soomeone
would
> > be
> > > kind enough to share with us the diode polug in mod.  Best test is
to
> > use
> > > the
> > > onboard scope with and without compressor and compare.  Also, the
> > > 200V is subject to arcing in final  10M broadband coil at SWR
about
> > 3:1..the
> > > liquid rubber available for decorating car tire sidewalls will
stop
> > this but
> > > obviously better to work into proper load!
> > >
> > > how bout itguys....anyone willing to scan and send us the diode
mod or
> > post
> > > to
> > > a site where we can download?  I lost mine years ago...yes I
> > know...grey
> > > matter
> > > first part of body to turn to centent!
> > >
> > >
> > > _______________________________________________
> > > Central-Electronics mailing list
> > > [email protected]
> > > http://mailman.qth.net/mailman/listinfo/central-electronics
> >
> > _______________________________________________
> > Central-Electronics mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/central-electronics
> >
>
> _______________________________________________
> Central-Electronics mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/central-electronics