[CALV-AUXCOMM] Tape Measure Yagi Build - RSVP

[Andrew Charland]

I have 4 BNC connectors and RG58 coax(not sure how much) that AD3DT left at
Field Day for anyone's use and I have a 20'-25' section of RG58 with BNC
connectors at both ends not being used that can be cut and used. What
tools, soldering iron, etc. will we need? Think it's ok to produce the
fumes/smoke in that room?

Andy
KC3WRX

On Mon, Jun 29, 2026, 15:42 Shawn Donley via CALV-ARES <
calv-ares at mailman.qth.net> wrote:

> All,
>
> At our next AUXCOMM meeting on July 16, we will be building some three
> element tape measure Yagi antennas for fox hunting (other uses too).
>
> PLEASE RSVP BY JULY 4th IF YOU ARE INTERESTED IN BUILDING AN ANTENNA SO WE
> CAN GET THE MATERIALS.
>
> There will be a modest cost, likely under $20.00, to cover the materials.
>
> TNX and have a great holiday.
>
> N3AE
> Calvert AEC
> ______________________________________________________________
> Visit us on the web: https://ares.k3cal.org
>
> CALV-ARES mailing list
> Home: http://mailman.qth.net/mailman/listinfo/calv-ares
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:CALV-ARES at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>