[CALV-ARES] Winlink password requirement

[James Tetlow]

Thanks.

Sent from my iPad,
Best Regards, 73,
Jim Tetlow

> On Apr 4, 2016, at 22:05, WG3K at Winlink.org wrote:
> 
> If you haven't already seen this...
> 
> ----- Original Message -----
> To: WE4TSA, WE8J, WF2V, WF7E, WF7W, WG3G, WG3K, WG4EMA, WG4K, WG5EOC, WG5L, WG6CFS, WG8Z, WG8Z-2, WH6ANH, WH6DYN, WH6EAL, WI7EOC, WI9WEM
> Subject: //WL2K User Notice
> Date: 04 Apr 2016 05:08:00 -0000
> From: SYSTEM
> 
> APRIL 4, 2016
> 
> ALL,
> 
> LAST REMINDER: April 15 is still the drop dead date for all Winlink users to have a password with secure login. If you have not completed this task, and wish to continue to use Winlink, please get this done as soon as possible.
> 
> Thanks,
> 
> Your Winlink development team
> 
> --------------------------------------------------------------------------------------
> December 18, 2015
> 
> ATTENTION:
> 
> On April 15, 2016, the Winlink system will begin requiring the use of passwords and secure login for ALL users. This is being done to enhance the privacy and protection of the Winlink community. If you've already entered both a password and also turned on Secure Login, you don't have to make any other changes. The transition taking place on April 15, 2016, won't change your operation. If you have not set a password for your account, and also have not enabled Secure Login, we recommend you do it now so you won't be surprised on April 15, 2016.
> 
> FOR RMS EXPRESS, setting a password and Secure login are very easy to do:
> 
> 1. Connect your computer to the Internet.
> 
> 2. Run RMS Express.
> 
> 3. Click the menu item ?Files" then "RMS Express Setup"
> 
> 4. Enter your password in the field next to your callsign, and insure that the "Require password on connections (Enable Secure Login)? is checked.
> 
> 4. Enter a password recovery e-mail in the appropriate field. This must be a non-Winlink address.
> 
> 5. Click "Update".
> 
> 6. RMS Express will set your password on the Winlink system and enable secure login.
> 
> NOTE: If you're using a different Winlink e-mail client program such as Paclink or Airmail, you must follow these steps:
> 
> 1. Go to www.winlink.org, and select the MY ACCOUNT tab.
> 
> 2. If you haven't previously selected a password, select one now. Otherwise log in.
> 
> 3. Navigate to the screen that lists your account information, and click EDIT.
> 
> 4. Scroll down and enter your password-recovery e-mail.
> 
> 5. Check the box to enable Secure Login.
> 
> 6. Click SAVE at the bottom of the screen.
> 
> 7. Next, find the place in your Winlink client program where you can enter your password, and set it for the client.
> 
> 8: NOTE: FOR AIRMAIL: If you have gone to menu item, TOOLS>OPTIONS>SETTINGS,  put in your password, and saved it, you will be okay. If you have no password for Winlink, follow the instructions above.
> 
> Your Winlink Development Team
> 
> __._,_.___
> ----- End of Original Message -----
> 
> ______________________________________________________________
> Visit us on the web: https://ares.k3cal.org
> 
> CALV-ARES mailing list
> Home: http://mailman.qth.net/mailman/listinfo/calv-ares
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:CALV-ARES at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html