[CALV-ARES] Fw: Fwd: [PG-AresRaces] Winlink 2000 Training Sessiom

[Dennis/N3QHC]

Please read Jim’s email below.  Hopefully, some of you will attend this training.  

73, Dennis N3QHC

From: Jim Montgomery 
Sent: Tuesday, August 13, 2013 9:27 PM
To: n3seo at aol.com ; kb3kow at yahoo.com ; n3ae at arrl.net ; k3csx at arrl.net ; kb3kky at arrl.net ; PG-AresRaces at yahoogroups.com 
Subject: Fwd: [PG-AresRaces] Winlink 2000 Training Sessiom

  

This is a reminder that there are plenty of seats available for the August 24 WL2K class.  The word is not getting out as well as I would have liked.  The MDC Section SET this year will rely heavily on the Winlink 2000 System.

Please distribute this to your local ARES and club reflectors.  There is a basic change in that there is no requirement to bring any radio equipment, but it's OK if you do.  I feel this would be a burden on some and a turn off to those who have no station at the present time.  Just bring a laptop computer and a sidekick.

Email me your reservations  as soon as possible to wb3kas at aol.com

tnx es 73, de

Jim
Subject: [PG-AresRaces] Winlink 2000 Training Sessiom


  
To All ARES Members in the Region V Hospital Area Interested in Winlink's RMS Express Training:

PRGE ARES is sponsoring an Introduction to RMS Express Training Session on Saturday August 24 from 0900 to 1500 at the Fire Services Building 6820 Webster St, Hyattsville, MD (actually located in Landover Hills!!)

The morning session will be devoted to the VHF/UHF side of RMS Express while the afternoon will concentrate on the HF side or WinMOR.

Both sessions will have a presentation followed by a hands on session with your own equipment.  For starters, you must bring your VHF radio with small antenna or dummy load, power supply and notebook computer.  All Winlink communications will be with and among the students in the class room.

The cables for your radio may be ordered from www.buxcomm.com.  There is a cross reference table on their web page, but I find it easier to call them up on the phone and tell them what radio you have and they will tell you what cable you need to interface your radio with a Kantronics KPC3+ TNC.  The TNCs will be on loan to you doing the training session.  Cost of the cable is about $20.

The second item to buy is the cable that connects the TNC to your laptop.  It has a 25 pin male connector on one end and 9 pin female cable connector on the other.  Part number is 83-930 and costs $5.19 ea. You can order it from MCM at:  www.mcmelectronics.com 

Last is the USB serial adapter for the above MCM cable to connect to your laptop.  If you already have one, bring it and we'll see how it performs.  Now, listen to me.  Don't buy a cheap one. . .they won't be reliable. . .I KNOW. . .BEEN THERE. . .DONE THAT. . .GOT THE BAD ONES TO PROVE IT. . .SO SAVE YOUR MONEY!!  The one highly recommended by the Winlink Development Team and that I use exclusively is Keyspan, part number USA-19HS.  Walmart use to carry them in the store, but now you have to order it online from them.  Can't recall the cost. . .maybe $30 or so.

If you are considering a D710, it's a whole different arrangement, with only one unique cable that is sold on ebay.  Contact me off line about this set up.

I hope to have WiFi available to access the WL2K site during the sessions.

Now, if you are really serious about this, please let me know so I can make arrangements for A/C extension cords, room size, etc.  If you are short on any equipment you need, contact me offline.  Lunch on your own with a few fast food places nearby.

I hope you will consider this training.  

I'd like to have RSVPs by COB 1 Aug.  Limited seating dictates the first 20 who sign up, gets a seat!

There are no manuals to buy, nothing to download nor fees to pay, just tip the instructor if ya learned anything useful!

tnx es 73, de

JIm
WB3KAS
PRGE ARES EC


__._,_.___Reply via web post  Reply to sender  Reply to group  Start a New Topic  Messages in this topic (5)  

Recent Activity: 
Visit Your Group 
 Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use • Send us Feedback .
 
__,_._,___
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/calv-ares/attachments/20130813/bc1191f5/attachment.html>