[Boatanchors] Mixer Troubleshooting Question For my Homebrew Superhet Novice Receiver

[Ron.K3PID]

Check out the February ER mag. There is the first of a two part article on mixers.

Ron K3PID



----- Original Message -----
From: <whitebear1122 at comcast.net>
To: <boatanchors at mailman.qth.net>
Sent: 2/25/2021 8:46:07 PM
Subject: [Boatanchors] Mixer Troubleshooting Question For my Homebrew Superhet Novice Receiver
________________________________________________________________________________

Hi Guys, I'm scratching my head over the mixer circuit on my Novice
superhetrodyne receiver project.  Mixers should be simple, and I should see
the addition and the subtraction of the LO and RF.  I'm seeing diddly squat.



Here is a link to the schematic and some measurement notes around the mixer.
The mixer is getting the RF signal and the HF oscillator but I'm not seeing
what I'm expecting to see at 730 KHz on the spectrum analyzer.  



What sort of p-p amplitude should I expect at the output of the mixer on pin
6?



Scotts Mate For The Mighty Midget Receiver Notes
<https://www.qsl.net/wa9wfa/ha00000.htm> 



This is just my 2nd homebrew project so I'm still busy learning things.  Any
advice or hints would be appreciated.  I must be overlooking something
obvious.  



Thanks, Scott WA9WFA

______________________________________________________________
Boatanchors mailing list
Home: http://mailman.qth.net/mailman/listinfo/boatanchors
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Boatanchors at mailman.qth.net

List Administrator: Gary Harmon, K5JWK
** For Assistance: gharmon at idworld.net **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ron.k3pid at sbcglobal.net